Contact us

GreaseBeta Wet Well Treatment Blocks 

Preventative measures.

The vast majority of lifting station problems are caused by blockages within the pumps or a failure in level control where the activation floats get stuck. Grease is one of the main causes of these two issues. Naturally lighter than water, it floats, and as more grease enters the holding chamber, begins to form a ‘crust’. Small chunks of grease will break free as surfactants, emulsifiers and chemicals from cleaning products reach the station.

These small chunks of grease get sucked into the pumps, stopping them from working efficiently. Waste grease also sticks to the float activation systems causing them to fail, resulting in the pumps tripping out from overload as they run dry or failing to activate at all as the floats remain stuck underwater.

GreaseBeta Wet Well Treatment Blocks utilise product-specific microbes is a slow-release preparation for breaking down grease and other organic matter in lifting stations, pumping stations and wet wells. Available in sizes between 400g and 6kg to suit the facility concerned, they should be suspended in a slow-flowing area of the tank, mid way between the low and high level switches, so that the block is covered when the tank is full and is exposed when it is empty.

logos-group 1

Why choose GreaseBeta Wet Well Treatment Blocks?

greener

Environment

  • Removes CO2e travel costs of engineers
  • No more flood damage to property and environment
  • Sustainable technology
  • Environmentally friendly response to a pollution problem
leaner

Compliance

  • Continuous 24 hour dosing, no reliance on manual or automated dosing
cleaner

Efficacy

  • Reduces BOD & COD levels
  • No more reactive/ emergency callouts for drain blockages
  • Improved efficiency of waste water plants
  • Controlled costs
  • Easy to install and low maintenance costs

FAQs

Are GreaseBeta Wet Well Treatment Blocks right for my business?

GreaseBeta Wet Well Treatment Blocks are ideal for:

  • Sites with pump stations, sumps or wet wells.
  • Problem sites with fat and odour issues, as these can be all but eliminated.
  • Holiday parks.
How do GreaseBeta Wet Well Treatment Blocks work?

These 400g - 6kg blocks utilise a highly effective microbial strain mix as a slow-release preparation for breaking down grease and other organic matter in lifting/pumping stations and wet wells. These microbes actively degrade any FOGs present within the drainage system, ultimately turning the waste into H2O and CO2.

  • Easy to install and low maintenance costs.
  • Continuous 24 hour dosing, no reliance on manual or automated dosing.
  • Reduces BOD & COD levels.
  • No more reactive/ emergency callouts for drain blockages.
  • No more disruption to operations.
  • No more flood damage to property
  • Controlled costs.
  • Environmentally friendly response to a pollution problem.
  • Improved efficiency of waste water plants.
Do GreaseBeta Wet Well Treatment Blocks require maintenance?

No - they simply need replacing at set times.